Buffers

Compare Tool

Select up to 3 products

1 - 32 of 1819
Sort
View
Show
  • pH Electrode Solutions

    Thermo Scientific Orion

    Electrode Storage Solution 475 mL plastic bottle pH of solution is 6.2 to 7.4 For short term storage of all electrodes for one day to a week. Electrode Filling Solution Internal filling solution for Ross-type electrodes (3M KCl). In packages of five 60 mL bottles.

  • Color-Coded pH Buffer Solutions

    chemForce™ (a Thomas Scientific Brand)

    Harmonized #: 3822.00.0002 5090 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General

  • Orion® pH Buffers

    Thermo Scientific Orion

    Orion pH buffers are manufactured under ISO 9000 quality standards. Buffers are color-coded for ease of use, packaged with buffer/temperature tables for accurate calibrations and NIST traceability. All-in-One Buffer kit (1233M21) includes pint bottles of 4 (pink), 7 (yellow) and 10 (blue)…

  • Available in clear or color-coded buffers Traceable to NIST standards and available in a variety of packaging selections. Provides a tolerance of ±0.02 pH at 25°C and the bottle label provides temperature correction data from 0° to 50°C. All Thomas buffers offer…

  • Accurate calibration Sealed buffer pouch provides disposable convenience More accurate first time measurements Easier to use than conventional liquid buffers; no secondary reservoir required. All buffers are certified NIST traceable; used pouch can be attached to permanent batch…

  • Color-Coded pH Buffers

    Ricca Chemical

    Standardized and certified traceable to NIST Standard Color-coded for quick reference Accuracy ±0.01 pH at 25°C pH temperature chart, lot numbers and expiration dates on each label pH 4.0 buffer is colored red, 7.0 buffer is yellow or green and 10.0 buffer is blue.…

  • Clear pH Buffer Solutions

    chemForce™ (a Thomas Scientific Brand)

    Harmonized #: 2806.10.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General

  • Color-Coded pH Buffer Solution Set

    chemForce™ (a Thomas Scientific Brand)

    Size: 3 x 500 mL Harmonized #: 3822.00.0002 5090 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Appearance: Color coded Physical State: Liquid pH: 4, 7, 10 Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General

  • Prevent High Background by Effectively Removing Unbound Reagents Convenient Concentrated PBS & TBS Ideal for Blotting & ELISA Applications Following each step in a Western blotting procedure, a wash step is required in order to remove unbound reagents. PBS (Phosphate Buffered Saline) and…

  • For meter calibration. Certified. Standardized to NIST-SRM to 0.01 Unit.

  • Choose from economical solution bottles or individually sealed pH buffer pouches. NIST traceable materials Labeled with pH vs. temperature tables for accurate calibration All Oakton pH buffer solutions are freshness dated, and standardized against NIST-traceable references to…

  • The most accurate pH Standards available anywhere Certified Reference Material Traceable® Certificate supplied Highest accuracy available Traceable® pH Standards, Certified Reference Materials, are 100% compatible with all instruments and probes. Accuracy for the…

  • DPBS without Ca & Mg, 1X

    Quality Biological

    DPBS is a balanced salt solution (BSS) used for the handling and culturing of mammalian cells. Calcium and magnesium facilitate cell binding and clumping. DPBS without these ions can be used to wash and rinse suspended cells. Applications DPBS can be used to provide a buffer system to…

  • 1.68, 4.01, 6.86, 7.00, 9.18, 10.01, and 12.45 buffer solutions are available in 250 mL bottles.

  • pH 4, 7, 10 Buffer Kit

    GFS Chemicals

    6 x 500mL kit contains 2 x 500 ml of each pH 4 red (GFS 1634), pH 7 yellow (GFS 1639) and pH 10 blue (GFS 1645). The 3 x 4L kit contains 1 x 4L of each of the above items.

  • 50X TAE Buffer

    Quality Biological

    Tris-acetate provides electrical conductivity and maintains pH. EDTA inhibits metal dependent nucleases by chelating the divalent cations (Ca2 , Mg2 ), thus protecting the DNA from nucleases during the run. Filtered through a 0.22 µm membrane DNase, RNase, and Protease tested Applications …

  • Tris-HCl Buffer (1 M, pH 7.8)

    Boston BioProducts

    Components: Tris Base / Tris-HCl(1 M), Water(rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 1-micron filter. pH: 7.8 ± 0.2 Storage: 2-8°C

  • Our complete range of patented buffer solutions provide pH stability of up to five years. High buffering capacity provides rapid and stable calibration.

  • Ready to use, sterile 1X Phosphate-Buffered Saline solution prepared with 18.2 megOhm water, 0.2 micron sterile filtered and steam sterilized in final packaging. Balanced salt solution used in many biomolecular applications. Ultra pure quality makes buffer ideal for use in a variety of cell…

  • The MOST accurate pH Standards available anywhere now color-coded for convenience Traceable® pH Standards, Certified Reference Materials, are 100% compatible with all instruments and probes. Accuracy for the Traceable® Buffer at 25°C is ±0.010 pH—the most precise…

  • 2M TRIS-HCl, pH 8.8

    Quality Biological

    Tris HCl 2 M pH 6.8 is useful with SDS-PAGE and Electrophoresis. Tris solutions are formulated into working concentrations for preparing the stacking and resolving portions of native or SDS-PAGE gels using discontinuous buffer systems according to Laemmli (1970) or Ornstein and Davis (1959). …

  • The Right Electrolyte for any Application An important part of your pH measurement, the pH sensor, requires special care and attention. METTLER TOLEDO offers the necessary maintenance and electrolyte solutions to meet your needs and ensure your measurements are accurate. The correct…

  • Optimum Results Filling Solutions

    Thermo Scientific Orion

    For use with ionplus® Sure-Flow® ISE electrodes Little or none of the ion of interest present helps prevent sample contamination Application-specific solution formulation improves response time Small temperature coefficients reduce electrode potential shifts from changing…

  • Composition: Water 98.99%, Potassium Acid Phthalate 1.01%, Thymol 0%, Methyl Alcohol 0% Boiling Point: Approximately 100°C Density: 1 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 4 Solubility Information: Miscible Shelf Life: 24 Months …

  • Concentration: 10% w/v Composition: Water 90.31%, Sodium Citrate Dihydrate 9.61%, Proprietary 0.09% Density: 1.05 Color: Colorless liquid Physical State: Liquid pH Range: 8 to 8.4 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: NOT REGULATED.

  • For visual determination of pH, using test kits. pH 4-10

  • For determination of Anionic Surfactants (Detergents) by the Crystal Violet method (Hach method 8028) and Selenium by the Diaminobenzidine method (Hach method 8194).

  • pH Buffer IUPAC Standard Solution with Certificate of Conformity and Traceability reporting exact pH buffer value with related expanded uncertainty (k=2). Traceable to IUPAC/NIST pH scale Guaranteed shelf-life thanks to premium aluminium packaging Colorless pH buffer solution

  • Chemical name: Hydrochloric acid Chemical synonyms: Hydrogen chloride solution Product Brand: Analytical Density (g/cm3): 0.99 Molecular weight: 36.46 Molecular formula: HCl UN Number:

  • Composition: Water 98.73%, Sodium Phosphate Dibasic 0.79%, Potassium Dihydrogen Phosphate 0.47%, Sodium Azide 0.01%, Brilliant Yellow 0% Boiling Point: Approximately 100°C Density: 1 Melting Point: Approximately 0°C Color: Yellow liquid Physical State: Liquid pH Range: 7 Solubility…

  • TBS, Tris buffered saline [10X] 100mM Tris HCl, 1.5M NaCl, pH 7.5

  • Composition: Water 84.82%, Acetic Acid 5.98%, Sodium Chloride 5.80%, Sodium Hydroxide 3%, 1,2-Cyclohexylenedimaine Tetraacetic Acid (CDTA) 0.40% Boiling Point: Approximately 100°C Density: 1.03 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.0…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.