Columns

Compare Tool

Select up to 3 products

1 - 32 of 9234
Sort
View
Show
  • PERMABOND® FFAP Capillary columns for GC Features Polyethylene glycol 2-nitroterephthalate close equivalent to USP G25 / G35 Polar phase Recommended for FAMEs, free carboxylic acids Similar phases: OPTIMA® FFAP, DB-FFAP, HP-FFAP, CP-Sil 58 CB, 007-FFAP, CP-FFAP CB,…

  • Flex-Column Economy Chromatography Columns

    DWK Life Sciences (Kimble)

    Ideal for use with gel filtration, ion exchange, affinity and adsorption media Economical Easy to use Universal fittings and tubing connections Ideal for use with gel filtration, ion exchange, affinity and adsorption media. Polypropylene reservoirs and column outlets are permanently…

  • low-polarity phase; Crossbond diphenyl dimethyl polysiloxane Rxi fused silica capillary GC columns were designed specifically to be the best columns available, for exceptional inertness, ultra-low bleed, and reproducible retention and selectivity. In addition to outstanding performance, this…

  • Characteristics: Seals at 1/4 turn past fingertight. High reusability. Won′t stick to metal or glass. Material Composition: DuPont VESPEL SP-21 (85% polyimide, 15% graphite) Maximum Temperature: 400 °C Legal Information: Supeltex is a registered trademark of…

  • General purpose gravity eluted column having a PTFE stopcock and reinforced beaded top. Column is constructed using MEDIUM WALL TUBING. Glass wool (not supplied) is used to support column packing. Lower end of the column has a round bottom.

  • HP-1ms

    Agilent Technologies

    100% Dimethylpolysiloxane Identical selectivity to HP-1 Non-polar Low bleed characteristics General purpose column Improved signal-to-noise ratio for better sensitivity and mass spectral integrity Bonded and cross-linked Solvent rinsable Temperature range:…

  • SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top standard taper outer joint. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Top Joint: ST 24/40 Note: since the…

  • nonpolar phase; Crossbond dimethyl polysiloxane General-purpose columns for solvent impurities, PCB congeners (e.g., Aroclor mixes), simulated distillation, arson accelerants, gases, natural gas odorants, sulfur compounds, essential oils, hydrocarbons, semivolatiles, pesticides, oxygenates. …

  • Bulk C18

    Separation Methods Technologies

    SMT manufactures the most reliable silica based octadecyl (C18) column available in the market today. This advanced new column is very stable at a wide pH range and high temperatures. SMT utilizes a proprietary bonding scheme that allows the resulting bonded phases to perform separation of basic,…

  • ZORBAX 80 Stablebond

    Agilent Technologies

    RR: Rapid Resolution 3.5 µm RRHT: Rapid Resolution HT 1.8 µm

  • Disposable Chromatography Columns

    Evergreen Scientific

    Columns are for use in general chromatographic work for extraction of components, with special applications in isoenzyme and protein studies, hemoglobin fractionation and desalting. Chromatography columns are precision-molded in 5 ? and 7 ? sizes from premium-grade, chemically inert plastics. …

  • Superspher® RP-select B is a highly reproducible traditionally produced spherical silica gel carriers with reversed phase properties and the hydrophobicity of a C-8 phase. This carrier is very well suited for the separation of basic compounds, but with still good properties for the…

  • SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a top standard taper outer joint. Designed for flash chromatography. Top Joint: ST 24/40. Column packing is supported by glass wool (not supplied). Note: since the chromatography column is…

  • midpolarity Crossbond phase Rxi fused silica capillary GC columns were designed specifically to be the best columns available, for exceptional inertness, ultra-low bleed, and reproducible retention and selectivity. In addition to outstanding performance, this combination of column…

  • NUCLEOSIL® is a family of totally porous spherical silicas with a very pure and uniform SiO2 structure Wide acceptance as routine packings for very different fields of chromatography One of the first spherical silicas used in HPLC Developed in the early seventies, it became a…

  • SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top standard taper outer joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is…

  • Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

  • midpolarity Crossbond phase General-purpose columns for alcohols, oxygenates, PCB congeners (e.g., Aroclor mixes), and pesticides. Equivalent to USP G46 phase 4.5" standard coil diameter

  • Combine good retention capacity with high recoveries. End-capped to minimize polar interactions. Recommended for strong non-polar analyte extractions. EPA Methods 506,508.1,525.2, 550.1,608,1613B, etc.

  • Prepared column, for use with Lachat FIA Nitrate methods.

  • proprietary Crossbond diphenyl/dimethyl polysiloxane phase An MXT-502.2 column will enable you to quantify all compounds listed in U.S. EPA Methods 502.2 or 524.2, whether you use a mass spectrometer or a PID in tandem with an ELCD. The diphenyl/dimethyl polysiloxane based MXT-502.2 stationary…

  • Ferrules,Valco,SS,1/16 in,10/pk

    Agilent Technologies

  • ZORBAX Eclipse XDB Columns

    Agilent Technologies

    Agilent ZORBAX Eclipse XDB columns – C18, C8, Phenyl and CN – provide four bonded phase choices for method development optimization. These columns provide good peak shape over a wide pH range (2-9) for additional method development flexibility with one family of columns. Eclipse XDB…

  • Polymeric 100 Å columns for general reversed phase separations. pH stable from 1 to 13 Better sample recovery than silica-based columns (there are no silanol groups) Excellent durability (stable to any concentration of water or organic solvent)   Five particle…

  • Chx Column Comp 100 X 1.0cm

    DWK Life Sciences (Kimble)

    Columns are supplied complete with glass barrel, 2 end fittings with 20 μm porosity HDPE bed supports, and screw caps Each column is also supplied with 5 feet (1.5 m) of FEP PTFE tubing (1/16” OD with 1.0 cm; 1/8” OD with 2.5 and 4.8 cm), 2 flangeless tubing nuts and 2 flangeless…

  • Glass Column with Stopcock Plug

    DWK Life Sciences (Kimble)

    A general purpose column for analytical separations A plug of glass wool can be used to support the column packing PTFE stopcock plugs, 821001-0002 and 821001-0004, control the flow rate Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I…

  • Cadmium Reduction Column

    DWK Life Sciences (Kimble)

    This column features all borosilicate glass construction with an 85 mL reservoir The glass wool plug and PTFE tubing at the bottom of the column are held securely in place by a BEVEL-SEAL™ connection, facilitating easy cleaning and assembly PTFE BEVEL-SEAL™ stopcock connector is…

  • Flex-Column 1.5X100cm Pk3

    DWK Life Sciences (Kimble)

    FLEX-COLUMNS® are economical and easy-to-use. Short columns are typically used for ion exchange chromatography, sample desalting and semi-disposable applications, while the long columns are ideally suited for gel filtration and adsorption chromatography. Constructed of polypropylene…

  • Chromatographic column with 2mm bore, 1:5 taper solid PTFE stopcock plug and porosity B (70 - 100 m) fritted disc sealed in.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.